Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
- 12. Steering
   12.1. Introduction
   12.2. Technical characteristics
   12.3. Steering wheel
   12.4. Tips of steering draft
   12.5. Replacement of protective covers of steering transfer
   12.6. Steering transfer
   12.7. Pump of the amplifier of steering
   12.8. Removal of air from system of steering with the amplifier
+ 13. Body
+ 14. Electric equipment






12.8. Removal of air from system of steering with the amplifier

PERFORMANCE ORDER
1. Removal of air from system needs to be made after a rassoyedineniye of hydraulic elements of system.
2. Uncover a nutritious tank and check liquid level.
3. Lift a forward part of the car and record on supports.
4. At the idle engine slowly several times turn a steering wheel from an emphasis against the stop to remove air from system. Repeat this operation until level in a tank considerably does not decrease.
5. Lower the car. Start the engine and slowly turn a steering wheel from an emphasis against the stop several times to remove air from system.
6. Repeat this operation until bubbles cease to appear in a nutritious tank.
7. If at hydraulic system of the amplifier of steering there is an extraneous noise, it specifies that in system still there is an air.
8. After removal of air from system switch off the engine. Give the chance to system to be cooled. Check liquid level in a tank which has to be at the level of the top tag.