Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
- 13. Body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. Cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. Front grille
   13:10. Front bumper
   13:11. Rear bumper
   13:12. Forward wing
   13:13. Door upholstery
   13:14. Lock, cylinder of the lock and handle of opening of a door
   13:15. Door glass
   13:16. Window regulator
   13:17. External mirror
   13:18. Doors
   13:19. Trunk lid
   13:20. Luggage carrier lock
   13:21. Cable of opening of the lock of a luggage carrier
   13:22. Replacement of racks of support of a back door
   13:23. Back door
   13:24. Lock of a back door, external handle and cylinder of the lock
   13:25. Casings of a steering column
   13:26. Central console
   13:27. Dashboard elements
   13:28. Dashboard
   13:29. Air inlet lattice
   13:30. Front seats
+ 14. Electric equipment






13:14. Lock, cylinder of the lock and handle of opening of a door

GENERAL INFORMATION

Details of the lock and the handle of opening of a forward door on models from 1990 to 1994

1 – external handle
2 – arm
3 – lock
4 – executive mechanism
central blocking
5 – internal handle
6 – shock plate of the lock
7 – the directing drafts
8 – decorative holder
internal handle

Details of the lock and the handle of opening of a back door on models from 1990 to 1994

1 – external handle
2 – arm
3 – lock
4 – executive mechanism
central blocking
5 – internal handle
6 – shock plate of the lock
7 – the directing drafts
8 – decorative holder
internal handle

Details of the lock and the handle of opening of a back door on models since 1995

1 – external handle
2 – lock
3 – executive mechanism
central blocking
4 – shock plate
5 – the directing drafts
6 – clamp of the internal handle
7 – internal handle

Details of the lock and the handle of opening of a forward door on models since 1995

1 – clamp of the internal handle
2 – internal handle
3 – external handle
4 – shock plate of the lock
5 – lock
6 – switch
7 – executive mechanism
central blocking
8 – intermediate lever
9 – the directing drafts

PERFORMANCE ORDER
1. Lift door glass, remove an upholstery of a door and a protective film from a door.
Internal handle
2. Before removal of drafts previously press a clamp.
3. Disconnect drafts of the lock of a door from the internal handle of opening of a door.
4. Remove guides of drafts and unscrew screws of fastening of the handle (are specified by shooters).
5. Remove the internal handle of opening of a door from a door.
6. Installation is made in the sequence, the return to removal.
7. At installation of the internal handle of a forward door on models since 1995, weaken a bolt (1) of fastening of the intermediate lever and move a clamp (2) down then tighten a fastening bolt.
Cylinder of the lock and external handle
8. Disconnect drafts from the cylinder of the lock and the external handle.
9. Unscrew nuts (are specified by shooters) and remove the external handle of opening of a door together with the lock cylinder.
10. For removal of the cylinder of the lock weaken a spring bracket (1) of fastening and take the lock cylinder from the external handle of opening of a door.
11. Installation is made in the sequence, the return to removal.
Door lock
12. Remove the internal handle of opening of a door and disconnect drafts from the door lock.
13. Through an opening at doors disconnect from the lock of draft of the external handle of opening of a door and the cylinder of the lock.
14. Unscrew three screws of fastening of the lock and take the lock from a door.
15. Installation is made in the sequence, the return to removal.