Subaru Legacy

since 1990-1998 release

Repair and operation of the car



Subaru Legacy
+ 1.1. Identification numbers
+ 2. Maintenance
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. Mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. Gear shifting lever
      8.1.4. Check and replacement of support of the transmission
      8.1.5. Switches of light of a backing and neutral provision of KP
      8.1.6. Removal and installation of the transmission
   + 8.2. Automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. Suspension bracket
+ 12. Steering
+ 13. Body
+ 14. Electric equipment






8. Transmissions

8.1. Mechanical transmission

8.1.1. Introduction

GENERAL INFORMATION

The transmission will transform the torque transferred from the engine in size and the direction. It is necessary for ensuring optimum speed and passability of the car, and also for the most economic operation of the engine and the movement of the car a backing. On the SUBARU cars five-step completely synchronized transmission is installed. The transmission consists of several knots bolted together and represents separate assembly. Assembly of the transmission consists of a case of coupling, the main case in which the differential and the transmission and a back case are placed. On models 4WD the back case has extension where the driveshaft connects to the conducted transmission shaft.

Because of complexity of the device and need of use of special devices repair of the mechanical transmission in house conditions is not recommended to be made.






Сведения в газете и на сайте oct-k.org